![]() My process works for me, I hope it will help those who didn't like this powder yet. Do not touch the parts at the end of the cooking time before they are cold enough, otherwise, you will have non desirable marks. then put them back to the oven for 20 min -) the fact that the parts are hot enough to start the curing process, the powder start to melt right away and do not escape the parts due to wind or Faraday effect. when the parts are hot, put them out of the oven, hang them outside and apply a thin coat of the powder. fill the gun tank with powder, I usually load 1/3 of the tank. install a dryer on the pressure air hose, setup at 2 bars maximum. then place the parts in the oven at 200 Deg C for 20min. attach the parts to the hanging wire using powder free gloves. rince well the parts and do not dry it with anything!!! then I washed the parts under clear water with dish soap. clean the aluminium parts with sand paper or metallic brush (brass one!). ![]() I was also hesitating with the flat black powder regarding the 2 negative comment I saw.īut honestly, the powder is just perfect!!! Headlights - Taillights - Accessories - Moreīlack Flat Powder is PERFECT It took a bit of time to me to got the results I want with the Powder Coating thing.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |